Rosales Recommendations Subscribe

How-To ยท ๐Ÿš™ Car

How to Change the Key Fob Battery | Kia Sportage (2023 - 2025)

September 3, 2024 ยท 45 sec

๐Ÿ”‘ Kia Key Fob Battery: https://geni.us/Kia-Fob-Battery

Welcome to our tutorial on how to change the key fob battery for a Kia Sportage (2023 - 2025)! Follow these easy steps to ensure your key fob is always powered and ready to go.

Steps Covered:
1. Locate the Button: Find the button near the edge on the side or back of the key fob. Press it and pull out the key.
2. Separate the Key Fob: Position the key in the key fob and turn it slightly to separate the top from the bottom. Pull the key fob apart.
3. Remove the Battery Casing: Take out the plastic casing that holds the battery.
4. Replace the Battery: Carefully press up on the old battery to remove it. Replace it with a new Panasonic CR2032 industrial 3-volt battery. (Link at the top for the battery.)
5. Reassemble the Key Fob: Align the three holes with the three dots in the key fob and press it in carefully on the sides. Push the case back together.
6. Insert the Key: Finally, insert the key back into the key fob.

๐ŸŒŸ If this was helpful, hit the Subscribe button now to let us know.

This is our recommendation, based on researching and trying to find the best solution. If you buy through a link, it doesn't cost you anything extra, and we may earn a small commission. As an Amazon Associate we earn from qualifying purchases. Since the start of 2021, we've given 90% of any profit we personally receive through these links to our church.

Read the transcript

Here is how to change a key fob battery on a Kia Sportage. This is for my 2023 hybrid edition. First, look for the button that you'll see near the edge on the side or on the back. Press it, pull out, you'll get the key. Then take the key and position it in the key fob so that when you turn slightly, it'll separate the top from the bottom. Pull it apart. Once you have it separated, you're going to want to take out this plastic casing that is holding the battery. Then carefully press up on the battery so that it's removed. It uses a Panasonic CR2032 industrial 3-volt battery. I'll include the link to this in the description if you want to use the same one. Get the new battery. Place it back in. To put it back in, you see those three holes, align them with the three dots in the key fob. Press it in carefully on the sides. Assemble it, pushing the case back together, and simply insert the key back to the key fob.

More like this

It's free on YouTube. One tap and you're on the journey with us.

Subscribe to join the journey